User Manual Q&AAnswer
Feb 19, 2025 - 09:32 PM
To install the batteries and SD card in the Agitato A323 2-Pack Deer Trail Cameras, please follow these steps:
1. Open the cover of the battery compartment located on the bottom of the camera.
2. Insert eight 1.5V AA Alkaline or Lithium batteries into the battery slots, making sure to match the correct polarity (negative or "flat" end against the long spring of each battery slot). We recommend using Energizer AA Lithium batteries for maximum battery life.
3. Close the battery compartment cover securely.
4. Insert the SD card into the SD card slot, which is also located on the bottom of the camera. Make sure the label side of the SD card is facing upwards. You should hear a "click" sound when the card is installed correctly.
5. To remove the SD card, gently push in the card to release it from the slot. Make sure the camera's power switch is in the OFF position before inserting or removing the SD card or batteries.
Please note that the Agitato A323 2-Pack Deer Trail Cameras require a standard-size SD memory card with a maximum capacity of 512GB (Class 10). We recommend using SanDisk 32GB SDHC/Class 10 memory cards for the best cost performance. It is also recommended to format the SD card in the camera before use for optimal performance.
For more detailed instructions and information about the camera, please refer to the instruction manual provided in the box.
Add New Comment