User Manual Q&AAnswer
Feb 19, 2025 - 05:58 AM
To bind the Spektrum FC6250HX helicopter flybarless system to your transmitter, follow these steps:
1. Ensure that the flight battery and transmitter batteries are fully charged.
2. Power on the transmitter and select the model memory you want to bind the FC6250HX to.
3. Power on the FC6250HX flight controller and wait for initialization to complete.
4. Press and hold the bind button on the FC6250HX flight controller until the orange LED starts flashing.
5. Put your transmitter into bind mode according to the instructions for your specific transmitter model.
6. The orange LED on the FC6250HX flight controller and the remote receiver will remain lit when the binding process is successful.
7. Release the bind button on the FC6250HX flight controller and exit bind mode on your transmitter.
8. Test the controls to ensure that the FC6250HX is responding correctly to your transmitter inputs.
For more detailed instructions and troubleshooting tips, refer to the "Binding with Optional Second Remote Receiver" section in the user manual.
Add New Comment