User Manual Q&AAnswer
Feb 19, 2025 - 05:56 AM
To measure AC voltage using the PeakTech 2510 Power Analyzer, follow these steps:
1. Push the "Power Switch" to the "ON" position.
2. Select the "AC V/A/Watt Switch" on the front panel.
3. Select the "Current In Select Switch" to the "DIRECT" position.
4. Connect the red test lead to the "V/Ohm Terminal" and the black test lead to the "COM Terminal".
5. Connect the test lead probes into the circuit where you want to measure the AC voltage.
6. The LCD display will show the AC voltage directly.
Please refer to the "AC Voltage, AC Current Measurement" section in the user manual for more detailed instructions and safety precautions.
Add New Comment