User Manual Q&AAnswer
Feb 19, 2025 - 05:53 AM
To connect the kvm-tec KT-6016R-F MAXflex Full HD KVM Extender over IP, follow these steps:
1. Connect the CON/Remote and the CPU/Local Unit to the supplied 12V 1A power supply.
2. Connect the USB cable to a USB socket on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect the keyboard and mouse to the CON/Remote Unit.
3. Connect the CPU/Local and the CON/Remote Unit with the network cable.
4. Connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU local unit (PCin).
5. Connect PC Audio/out to Local Audio/in with an audio cable. Then use another audio cable to connect the Remote audio/out.
6. Use the audio cable to connect Local Audio/out to the PC Audio/in and Remote Audio/out to the Audio cable to the microphone.
7. If using a switch, connect all endpoints to the switch. Make sure all connections have a bandwidth of 1Gbit/sec. For video sharing, you need a switch that supports IGMP snooping.
Please refer to the manual for more detailed instructions and diagrams.
Add New Comment