User Manual Q&AAnswer
Feb 19, 2025 - 05:52 AM
To connect the KUFATEC VW T5 7H Complete set Active Sound incl Soundbooster to your vehicle, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Strip the insulation of the vehicle's cable that you want to connect to (green marked cable) at one point using a suitable tool.
2. Strip the insulation at the end of the cable from the KUFATEC cable set that you want to connect (yellow marked cable).
3. Twirl the wires of the stripped cable together.
4. Place the end of the KUFATEC cable under the stripped point of the vehicle's cable and wrap the KUFATEC cable around it.
5. Secure the connection by wrapping insulating tape around the connection point.
Please note that if the KUFATEC cable set consists exclusively of grey wires, connect the wires according to the cable inscription.
For the complete installation process, including removing trim panels, connecting CAN-High & CAN-Low, grounding, routing the connecting cable for the sound generator, and installing the sound generator, please refer to the detailed instructions provided in the manual.
It is important to follow all safety instructions and consider the legal requirements and regulations for the use of the sound booster. If you have any difficulties or questions during the installation process, you can contact KUFATEC for support by phone or email. They also offer the option to have the installation done at their works in Bad Segeberg.
Please note that any costs incurred by a third person executing the installation will not be supported by KUFATEC, unless there is a mistake caused by their product.
Add New Comment