User Manual Q&AAnswer
Feb 19, 2025 - 05:37 AM
To prepare the floor for installation of the EPOWP YY-WX295001ALJ freestanding bathtub, you should follow these steps:
1. Clean and level the floor: Ensure that the floor surface is clean and free from any debris. Use a level to check if the floor is level. If it is not level, you may need to make adjustments to ensure a stable installation.
2. Trace the outline of the bathtub: Place the bathtub in the desired location on the floor and trace its outline with a pencil. This will help you determine the exact position for installation and mark the drain hole location.
3. Move the tub away: Once you have traced the outline, move the tub away from the installation area so that you can proceed with the plumbing installation.
By following these steps, you will be able to properly prepare the floor for the installation of the EPOWP YY-WX295001ALJ freestanding bathtub.
Add New Comment