Answer

Feb 19, 2025 - 05:13 AM
To charge the Automoving Light battery, follow these steps:
1. Use the provided battery charger kit to fully charge the battery before first use. The charging time for an empty battery is up to 2 hours.
2. Connect the Automoving Light Battery to the Battery charger adapter.
3. Slide the battery forward to connect it to the Battery charger adapter, ensuring that it is mounted securely and the battery latch has clicked into place.
4. Connect the AC power adapter to the Battery charger adapter.
5. Connect the AC power adapter to a power source (100-240 V, 50/60 Hz). The AC power adapter will display a red LED light when charging, and the strobe on the battery will flash while charging.
6. The Automoving Light battery is fully charged when the green LED light turns on. Disconnect the AC power adapter from the power source and disconnect the Battery charger adapter from the Automoving Light battery when the battery is fully charged.
Note: Do not charge the Automoving Light battery immediately after flight as the temperature may be too high. Wait until the battery cools down to room temperature before charging again. The ideal charging temperature is between 22o to 28o C (71.6o to 82.4o F). Additionally, the Automoving Light Battery charging hub (not included) can charge up to four batteries simultaneously.
Please refer to the provided user manual for more detailed instructions and safety precautions.
Add New Comment