How do I reverse the door swing on my Lec U5517W-S-B Static Under Counter Freezer? (Lec U5517W-S-B Static Under Counter Freezer User Guide)

Answer

manuals.plus

Feb 19, 2025 - 04:43 AM

To reverse the door swing on your Lec U5517W-S-B Static Under Counter Freezer, please follow the steps outlined in the user manual:

1. Ensure that the unit is unplugged and empty.
2. Tilt the unit backwards to remove the door.
3. Save all the parts that are removed for reinstallation.
4. Do not lay the unit flat as this may damage the coolant system.
5. It is recommended to have two people handle the unit during assembly.
6. If you are not confident in reversing the door yourself, it is recommended to contact a qualified technician.
7. Remove the two screws on the back of the unit.
8. Lift the top cover away from the fridge.
9. Remove the three screws and the upper hinge that hold the door in place. Lift the door and place it on a padded surface to prevent scratching.
10. Swap the bottom bush and bottom bush cap of the door, ensuring the bottom bush key is in the correct position.
11. Remove the lower screws, hinge bracket, and adjustable feet from the unit bottom.
12. Remove the xxxx -type adjustable feet from the other side of the unit bottom and transfer it to the corresponding position on the opposite side.
13. Reattach the two lower screws, hinge bracket, and adjustable feet to the opposite side of the unit bottom, loosely securing them.
14. Carefully set the upper door back into place, ensuring it is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge.
15. Insert the door limiter hinge bracket and xxxx it to the top of the unit, using a spanner if necessary.
16. Put the top cover back and fix it in place with the screws.
17. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the leveling feet as needed.

Please note that these instructions are a general guide, and it is important to refer to the specific instructions provided in the user manual for your model. If you are unsure or have any difficulties, it is recommended to seek assistance from a qualified technician.