Answer

Feb 19, 2025 - 04:28 AM
There are two options for attaching the Virtual Fly EFOS Flight Simulation to your desktop or home cockpit setup.
Option A: Using Anti-slip Legs
1. Introduce both anti-slip legs (B) into the lower slots from the backside of the EFOS module.
2. Use the provided Allen key (H) to tighten the xxxx on each anti-slip leg until you feel resistance.
3. Place the EFOS module on the surface where it will rest, and the anti-slip legs will ensure it won't move.
Option B: Using SWITCHO Clamp (sold separately)
1. Slide the SWITCHO Clamp into the lower slots of the EFOS module.
2. Attach the clamp onto the support base of your home cockpit setup.
Please refer to the hardware setup section of the user manual for visual diagrams and further instructions.
Note: The SWITCHO Clamp is sold separately and can be purchased from the Virtual Fly website.
For additional support, you can contact Virtual Fly's technical support at support@virtual-fly.com.
Add New Comment