User Manual Q&AAnswer
Feb 19, 2025 - 04:19 AM
To set up the audio-technica AT-ONE Series Wireless Systems Microphones, follow these steps:
1. Ensure that the receiver is at least 1 meter above the ground and 1 meter away from a wall or metal surface to minimize interference.
2. Connect the DC 12V 500mA power supply to the power connector on the back of the receiver.
3. Connect the receiver output to an audio mixer or amplifier input using a standard audio cable with a 3-pin XLR or ¼" connector.
4. Set the attenuation for the mic or line input using the mic/line switch on the rear panel of the receiver. The factory setting is 0 dB.
5. Open the battery cover of the handheld microphone or body-pack transmitter and insert two AA batteries, ensuring correct polarity.
6. Press and hold the power button on the handheld/body-pack transmitter for 4 seconds to turn it on. If the LED remains flashing (either red or green) after 4 seconds, the battery is low on power.
7. Use a small standard screwdriver or similar object to adjust the frequency of the transmitter to match the frequency of the receiver. Adjust the transmitters to the same channel as the receiver.
8. Use the 0 dB/-10 dB switch on the body-pack transmitter to adjust the audio input level.
9. Turn off the transmitter when switching frequency to avoid pops.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment