User Manual Q&AAnswer
Feb 19, 2025 - 04:17 AM
To properly install the TRADGARDSTEKNIK NPS55M Mobile Heater for Solid Fuels, please follow the instructions provided in the installation guide. Here are the key steps:
1. Read the instruction manual carefully and keep it for future reference.
2. Ensure that the heater is installed following the standards in force in your country and by qualified personnel.
3. Use the heater only for its intended purpose and avoid any other improper use.
4. Make sure to comply with the applicable legislation, regulations, and instructions in the manual to avoid any potential damages or liability.
5. Select the appropriate heating units based on the thermal balance of your building, considering heat transmission losses.
6. The NPS heater is designed to heat small and medium-sized rooms without a water heating system, such as carpentry shops, production halls, warehouses, livestock buildings, greenhouses, drying rooms, workshops, assembly plants, and construction sites.
7. The NPS heater is a mobile device that generates heat from solid fuel combustion (wood, coal, wood waste) and discharges smoke and gases through a chimney.
8. Ensure proper supervision over the device, including control of operating parameters.
9. Familiarize yourself with the heater's description and its various parts, such as the combustion chamber, covers, ashpan drawer, cast iron grate, fan assembly, electric box with thermostat, and transport wheels.
10. The heat is generated by combustion in the combustion chamber, and thermal energy is transferred to the fresh air through the walls of the combustion chamber and the heat exchanger.
11. The heated air is discharged through the exhaust grille, and the fan is automatically turned on and off based on the set temperature.
12. Use firewood logs with a humidity of 15-20% as the primary fuel. Alternative fuels can be used as admixtures up to 10% of the number of logs.
13. Avoid using forbidden fuels and wet fuels with low exhaust gas temperature, as they can cause accelerated wear and corrosion.
14. If using hard coal as a substitute fuel, ensure it meets the specified standards and grades.
15. When transporting and storing the heater, use appropriate lifting gear and secure it against shifting and tilting.
16. Before installation, check the completeness of the delivery and the technical condition of the heater.
17. Follow the installation requirements, including consultation with professionals, compliance with regulations, and ensuring proper fuel storage and ventilation.
18. Place the heater on an even, stable surface with sufficient load-bearing capacity, and maintain proper distances from flammable materials.
19. Connect the heater to the electrical installation using a plug-in socket with protective contact.
20. Connect the heater to the chimney with a profile of the appropriate cross-section and shape, ensuring proper draft and compliance with regulations.
21. Perform zero start of the heater, check for leaks, and make the user familiar with the operation.
22. Follow the user manual for starting and operating the heater, including proper fuel loading, lighting, and controlling the combustion process.
23. Perform periodic maintenance, including cleaning the combustion chamber, removing ash and slag, and cleaning the flue gas ducts through the cleanout holes.
For more detailed instructions and safety precautions, please refer to the TRADGARDSTEKNIK NPS55M Mobile Heater for Solid Fuels Installation Guide.
Add New Comment