User Manual Q&AAnswer
Feb 19, 2025 - 04:08 AM
To connect the Cambridge Audio Edge NQ Network Preamplifier to your home network, please follow these steps:
1. Ensure that your Edge NQ is powered on and connected to your audio system.
2. Connect the supplied Wi-Fi dongle to the USB port on the rear of the Edge NQ. Make sure it is within range of your wireless router.
3. On your smartphone or tablet, go to the app store and download the Cambridge Edge Remote app.
4. Open the app and follow the on-screen instructions to set up the Edge NQ on your home network. This may involve selecting your Wi-Fi network, entering the network password, and configuring other network settings.
5. Once the Edge NQ is connected to your home network, you can use the app to control and stream audio to the preamplifier.
Note: If you prefer a wired connection, you can also use the Ethernet port on the rear of the Edge NQ to connect it directly to your router using an Ethernet cable. This may provide a more stable and reliable connection for high-resolution audio streaming.
For more detailed instructions and troubleshooting tips, please refer to the "Internet radio" and "Bluetooth" sections of the owner's manual. You can also visit the Cambridge Audio support page at http://techsupport.cambridgeaudio.com for additional assistance.
Add New Comment