User Manual Q&AAnswer
Feb 19, 2025 - 03:07 AM
To install the JENNAIR JIC4324KB 24 Inch Electric Induction Cooktop, you will need to gather the required tools and parts listed in the instruction manual. The installation process involves measuring and cutting the countertop, installing brackets, placing the cooktop into the cutout, making the electrical connection, and completing the installation.
Here is a step-by-step guide to installing the cooktop:
1. Prepare the location: Decide on the final location for the cooktop and make sure the countertop is the correct thickness (13/16" to 2"). Clean the cutout of any dust and debris.
2. Install brackets: Depending on the type of countertop (marble or wood), follow the instructions provided in the manual to install the brackets using adhesive or screws.
3. Install cooktop: With the help of two or more people, place the cooktop upside down on a covered surface. Lower the cooktop into the cutout, making sure the clips on each side line up with the brackets. Push down on the cooktop to snap the clips onto the brackets.
4. Make the electrical connection: Disconnect power and remove the junction box cover. Connect the flexible cable conduit from the cooktop to the junction box using a UL listed or CSA approved conduit connector. Follow the instructions in the manual for your specific electrical connection type (4-wire or 3-wire).
5. Complete the installation: Check that all parts are properly installed and that you have all your tools. Dispose of/recycle packaging materials. Clean the cooktop with a mild solution of liquid household cleaner and warm water before use. Reconnect power and test the cooktop.
For more detailed instructions and illustrations, please refer to the "Installation Requirements" and "Electrical Requirements" sections of the instruction manual provided with the JENNAIR JIC4324KB 24 Inch Electric Induction Cooktop.
Add New Comment