User Manual Q&AAnswer
Feb 19, 2025 - 02:47 AM
To insert a SIM card into the iMotion Group PT101 Rugged Tablet, please follow these steps:
1. Turn off the PT101 completely.
2. Pull off the rubber cover located on the left side of the device to reveal the micro SD card slot and SIM card slot.
3. Have the rear of the rugged tablet face towards you to install the micro SD card or SIM card.
4. To insert a micro SD card into the micro SD card slot, make sure the side with the golden finger of the card faces downwards, and then slide the card into the slot.
5. Similarly, to install a SIM card, push the SIM card into the SIM card slot with its gold contacts facing towards you.
6. Place back the rubber cover to close the compartment.
7. If you need to remove a micro SD card or SIM card from the slot, push the card with your fingertip to slide it out.
Note: The SIM card slot is only available for the PT101 with a 4G module.
For more detailed instructions and illustrations, please refer to the "SD / SIM Card Installation" section in the iMotion Group PT101 Rugged Tablet User Guide.
Add New Comment