User Manual Q&AAnswer
Feb 19, 2025 - 02:41 AM
To reset the IKEA 505.034.14 DIRIGERA Hub for Smart Products, you can follow the instructions provided in the manual. Locate the pinhole on the underside of the hub and push a pin into it until the status lights turn off. After resetting, the centre light will blink red four times to indicate that the hub is ready. Please note that performing a factory reset will delete all previous hub information.
Reference: "Factory resetting: Push a pin into the pinhole on the underside of the hub until the status lights turn off. The centre light will then blink red 4 times when the hub is ready. Note – this deletes all previous hub information.
Add New Comment