User Manual Q&AAnswer
Feb 19, 2025 - 02:38 AM
To reset the IKEA 505.034.14 DIRIGERA Hub for Smart Products, follow these steps:
1. Locate the pinhole on the underside of the hub.
2. Insert a pin into the pinhole and hold it down until the status lights on the hub turn off.
3. Once the status lights turn off, release the pin.
4. The centre light on the hub will then blink red four times, indicating that the hub is ready.
5. Please note that performing a factory reset will delete all previous hub information.
It is important to refer to the instruction manual for further details and illustrations on how to reset the hub properly.
Add New Comment