User Manual Q&AAnswer
Feb 19, 2025 - 02:35 AM
To install the Rubine RCH-ASPIRA-90SS Cooker Hood, please follow these steps:
1. Install the cooker hood according to the recommended distance between 300mm to 350mm above the hob.
2. Drill holes on the proper positions of the wall and insert the provided wall plug into the holes. Tighten the xxxx into the holes and ensure it is tightly screwed.
3. Hang the cooker hood on the bracket and ensure it is level and stable.
4. Fix the ducting hose into the air outlet of the inner duct. It has to be tightly connected.
5. Adjust the desired height of the inner duct and draw 2 markings against the bracket holes.
6. Put the inner duct aside and drill the holes, then insert the wall plug into the holes.
7. Place the inner duct on the wall and tighten it with screws, ensuring the bracket is aligned.
8. Extend the air outlet ducting hose outdoors.
For more detailed instructions and illustrations, please refer to the "Installation Procedures" section in the Rubine RCH-ASPIRA-90SS Cooker Hood User Manual.
Add New Comment