User Manual Q&AAnswer
Feb 19, 2025 - 02:31 AM
To properly adjust the spring tension on the HYDRA1A Counterbalance Monitor Arm, follow these steps:
1. Start by positioning and firmly holding the arm horizontally.
2. If needed, ask for assistance to ensure the arm remains horizontal during adjustments.
3. Use the supplied Allen Key to locate the adjustment xxxx .
4. If the arm drops when released, turn the adjustment xxxx clockwise until it stays in a horizontal position.
5. If the arm rises when released, turn the adjustment xxxx counter-clockwise until it stays in a horizontal position.
6. Be cautious not to over-tighten the screws.
7. Pay attention to the Tension Indicator, which has a Red Indicator Line.
8. Never allow the Red Indicator Line to move beyond the "+" and "-" marks on the Left and Right Side of the tension indicator to prevent damage.
9. If the display does not stop at your desired position, tighten the screws as shown in the manual.
It is important to carefully follow these instructions to ensure proper balance and stability of the monitor arm.
Add New Comment