How do I install the PRO DVX FS-10 Devices Equipped Floor Stand? (PRO DVX FS-10 Devices Floor Stand Instruction Manual)

Answer

manuals.plus

Feb 19, 2025 - 02:15 AM


To install the PRO DVX FS-10 Devices Equipped Floor Stand, please follow these steps:

1. Unbox the product and ensure that all the necessary components are included. The components typically include the floor stand base, the stand pole, and any additional accessories.

2. Start by assembling the floor stand base. Place the base on a flat and stable surface.

3. Attach the stand pole to the base. Align the holes on the base and the pole and insert the provided screws through the holes. Use a screwdriver or the provided tool to tighten the screws securely.

4. Once the stand pole is securely attached to the base, you can now attach your PRO DVX FS-10 device to the floor stand. Refer to the device's user manual for specific instructions on how to mount it onto the stand.

5. After mounting the device, ensure that it is securely fastened and stable on the floor stand. Make any necessary adjustments to the device's position or angle as desired.

6. Finally, double-check all the connections and ensure that the device is properly powered and functioning correctly.

Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instruction manual provided with your PRO DVX FS-10 Devices Equipped Floor Stand for detailed and accurate installation instructions.