User Manual Q&AAnswer
Feb 19, 2025 - 02:00 AM
To charge the battery for the NORTH COAST ROCKETRY 07703 Launch Master Flying Model Rocket Launch Controller, follow these steps:
1. Make sure the safety/arming key is not in the safety key jack before proceeding.
2. Remove the screws from the front panel and insert the battery pack into the retention clip.
3. Connect the battery to the controller.
4. Replace the front cover and tighten the screws.
5. Charge the battery by inserting the charger jack into the charger receptacle on the controller.
6. Follow the instructions that came with the battery pack and the companion charger for specific charging instructions.
It is important to note that the LaunchMaster is designed for the battery to be charged without removing it from the case, using a standard charging jack. Be sure to use a 3000 mAh (or greater) nickel cadmium or nickel metal hydride battery for sufficient power delivery to ignite composite motor igniters and small clusters of black powder motors.
If you have any further questions or concerns about charging the battery for the NORTH COAST ROCKETRY 07703 Launch Master Flying Model Rocket Launch Controller, please refer to the instruction manual or contact North Coast Rocketry for assistance.
Add New Comment