User Manual Q&AAnswer
Feb 19, 2025 - 12:55 AM
To assemble the Magic Lamp PRO Evaporative Snow Machine, follow these steps:
1. Remove the Lamp Base Sub-Assembly from the packaging and place it on a firm, level surface.
2. Locate the Solution Line Quick Connect and Electric Socket at the top of the Lamp Base Sub-Assembly.
3. Remove the Lamp Top Sub-Assembly from the packaging.
4. Insert the Solution Line and mating electrical plug located inside the Lamp Top Sub-Assembly into the Quick Connectors on the Lamp Base Sub-Assembly.
5. After making the connections, set the Lamp Top Sub-Assembly onto the Lamp Base Sub-Assembly and secure it with the three bolts provided.
6. Remove the lid from the base of the Magic Lamp PRO by rotating the latch and lifting the lid away from the base.
7. Locate the fluid suction line inside the base on the lower left-hand side of the unit.
8. Insert the fluid suction line into a container of Global Special Effects Evaporative Snow Fluid so that the line rests on the bottom of the container. The Magic Lamp PRO base is designed to hold 1-Gallon Bottles or 5-Gallon Buckets of Evaporative Snow Fluid.
9. Place the Evaporative Snow Fluid container into the base of the Magic Lamp PRO.
10. Locate the control panel inside the base on the right-hand side.
11. Find the Rotary Selector Switches and set them to the desired settings as directed in Table 1 of the manual.
12. Once the Rotary Selector Switches are set, the unit is ready to be plugged into power.
13. Turn the power switch located on the control panel to the ON position.
14. Replace the lid to the Magic Lamp by reversing the process completed in Step 6.
Please refer to the manual for more detailed instructions and illustrations.
Add New Comment