User Manual Q&AAnswer
Feb 19, 2025 - 12:37 AM
To install the Phoenix FS0440 SERIES Fire Fighter safe, please follow the installation instructions provided in the user guide. Here is a step-by-step guide:
1. Choose a suitable location: Select a secure and easily accessible location for the safe. Ensure that there is enough space to open the door fully.
2. Prepare the floor: If you plan to fix the safe to the floor, make sure the floor is suitable for anchoring. The safe comes with fixing bolts for concrete, which should be used for floor fixing.
3. Position the safe: Place the safe in the desired location and ensure it is level. If floor fixing is required, mark the hole positions on the floor using the safe as a template.
4. Drill holes: Using a suitable drill bit, drill holes in the marked positions on the floor. Make sure the holes are deep enough to accommodate the fixing bolts.
5. Secure the safe: Insert the fixing bolts into the drilled holes and tighten them securely. Double-check that the safe is level and firmly anchored to the floor.
6. Test the door: Open and close the safe's door to ensure it operates smoothly. Check that the automatic slam shut door locking mechanism functions properly.
7. Set up the lock: Depending on the model you have (FS0440K, FS0440E, or FS0440F), refer to the user guide for instructions on setting up and programming the lock. The guide will provide detailed steps specific to your lock type.
8. Adjust the shelf: If needed, adjust the height of the included height adjustable shelf to accommodate your storage requirements.
Once the safe is installed and the lock is set up, you can start using it to store your valuable items and important documents securely.
Please note that this answer is based on the information provided in the user guide. For specific details and any additional questions, it is recommended to refer to the user guide that came with your Phoenix FS0440 SERIES Fire Fighter safe.
Add New Comment