User Manual Q&AAnswer
Feb 19, 2025 - 12:35 AM
To install the vola A62 Slotted Push Operated Waste, please follow the steps outlined in the installation instructions provided in the manual. Here is a step-by-step guide:
1. Start by removing any existing waste fittings from the basin or sink.
2. Insert the waste fitting through the waste hole in the basin or sink, ensuring that the rubber sealing washer is in place.
3. Secure the waste fitting in place by tightening the lock nut underneath the basin or sink. Use a wrench or pliers to ensure a tight fit, but be careful not to overtighten and damage the basin or sink.
4. Connect the waste pipe to the waste fitting, ensuring a secure and watertight connection. You may need to use a suitable adhesive or sealant to ensure a proper seal.
5. Test the installation by running water through the waste pipe and checking for any leaks. If any leaks are detected, tighten the connections or apply additional sealant as necessary.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific installation instructions provided with the product for the most accurate and detailed instructions.
If you require further assistance or have any additional questions, please contact vola directly at the provided contact information (Tlf: +45 7023 5500 or sales@vola.com). They will be able to provide you with any additional support or clarification you may need.
Add New Comment