User Manual Q&AAnswer
Feb 19, 2025 - 12:04 AM
To install the Buride Type Smart Home Wireless Charger, you have two options: blind hole installation or installation with a PC sticker. Here are the steps for each method:
Blind hole installation:
1. Drill a hole with a diameter of 60mm.
2. Stick the wooden cover in 3mm thickness on the hole.
3. Stick the wireless sticker on the center of the hole.
4. Tear off the double-faced tape from the wireless charger.
5. Insert the wireless charger into the hole.
Installation with PC sticker:
1. Drill a hole with a diameter of 60mm.
2. Stick the PC sticker (0.5mm thickness) on the hole.
3. Tear off the double-faced tape from the wireless charger.
4. Insert the wireless charger into the hole.
Please note that if you choose the blind hole installation method, you will need to use a wooden cover, while the PC sticker method does not require one.
Additionally, if you need to use an extension cable, follow these steps:
1. Remove the cover of the wireless charger.
2. Remove the original cable.
3. Install the extension cable in place of the original cable.
Important:
- Ensure that there is no metal on the surface of the wireless charging area.
- The thickness of the wooden cover should not exceed 3mm.
Add New Comment