User Manual Q&AAnswer
Feb 19, 2025 - 12:00 AM
To install the HiB 79570100 Maxim 50 LED Mirror, follow these steps:
1. Position the mirror in a suitable location according to the zonal diagram provided in Figure 1 of the manual. Make sure that the domestic electrical mains supply is within reach of the cable connection point of the product.
2. Carefully mark the position of the mirror using a soft pencil, ensuring it is level. Remove the mirror and mark the mounting points as shown in Figure 2. Ensure that all marked mounting points accurately match up with the fixing points on the mirror.
3. Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
4. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid cracking. Note that for plasterboard walls, specialist fixings should be purchased from a DIY or hardware store.
5. xxxx the supplied fixings into the wall plugs.
6. Ensure that the domestic electrical mains supply to which the mirror is being connected is turned off. Connect the domestic mains supply to the terminal box according to the wiring diagram provided on page 3 of the manual.
7. Hang the mirror in position.
8. Switch the domestic electrical mains supply for the mirror back on.
Please note that it is recommended to have two people install the mirror for safety and ease of installation. If you are unsure about any step, it is advisable to consult a qualified tradesperson.
Add New Comment