User Manual Q&AAnswer
Feb 18, 2025 - 11:41 PM
To install the PRODVX SB-50 Shelf Bracket VESA 75/100, please follow these steps:
1. Start by gathering all the necessary tools and equipment. You will need a screwdriver, a level, and the included hardware.
2. Locate a suitable wall or surface where you want to mount the shelf bracket. Ensure that the wall is sturdy enough to support the weight of the bracket and the device you plan to mount on it.
3. Use a level to ensure that the wall is straight and mark the desired position for the bracket. Make sure to align the VESA mounting holes on the bracket with the ones on your device.
4. Once you have marked the position, hold the bracket against the wall and use a pencil to mark the locations for the xxxx holes.
5. Pre-drill the marked holes using an appropriate drill bit size for the included screws.
6. Align the bracket with the pre-drilled holes and secure it to the wall using the provided screws. Make sure to tighten the screws firmly but not excessively.
7. Finally, attach your device to the bracket by aligning the VESA mounting holes on the device with the ones on the bracket. Secure the device to the bracket using the appropriate screws or bolts.
Please refer to the included installation instructions for any specific details or variations that may apply to your specific model.
Add New Comment