User Manual Q&AAnswer
Feb 18, 2025 - 11:35 PM
To remove the transit bolts from the VALBERG WF 1214 B W566C Washing Machine, follow these steps:
1. Before removing the transit bolts, make sure the appliance is in its final location and is leveled properly.
2. Locate the transit bolts at the rear of the washing machine. There are usually four bolts, one in each corner.
3. Use a wrench or a suitable tool to loosen and remove the transit bolts. Turn them counterclockwise to loosen them.
4. Once the bolts are loosened, carefully pull them out of the washing machine. Keep in mind that the bolts may be long and heavy.
5. Store the transit bolts in a safe place in case you need to transport the washing machine in the future.
6. After removing the transit bolts, check for any additional packaging materials that may need to be removed, such as foam blocks or plastic covers.
7. Once all the transit bolts and packaging materials are removed, the washing machine is ready to be used.
Note: It is important to remove the transit bolts before using the washing machine for the first time. Leaving the transit bolts in place can cause damage to the appliance and is not covered by the warranty.
Add New Comment