User Manual Q&AAnswer
Feb 18, 2025 - 11:13 PM
To properly install and set up the HORIZON HOBBY DLE35RA Gas Rear Exhaust with Electronic Ignition, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start by carefully reading the entire instruction manual to familiarize yourself with the product and its components.
2. Begin the installation process by mounting the engine onto the aircraft according to the recommended specifications provided in the manual. Ensure that all mounting bolts are tightened securely.
3. Connect the throttle linkage to the carburetor. Adjust the linkage so that the throttle servo moves smoothly and fully opens and closes the carburetor.
4. Connect the fuel line from the fuel tank to the carburetor. Ensure that the fuel line is properly secured and free from any kinks or obstructions.
5. Install the spark plug and connect the ignition module to the spark plug wire. Ensure that the ignition module is securely attached to the engine.
6. Connect the ignition battery to the ignition module. Follow the recommended battery voltage and polarity specified in the manual.
7. Set the engine's idle and high-speed needle valves according to the instructions provided in the manual. These adjustments may vary depending on your specific aircraft and operating conditions.
8. Perform a thorough pre-flight check, ensuring that all connections are secure and the engine is running smoothly. Check for any fuel or oil leaks.
9. Start the engine by following the recommended starting procedure outlined in the manual. Allow the engine to warm up before adjusting the idle and high-speed needle valves for optimal performance.
10. Once the engine is running smoothly, perform a final check of all controls and systems before flying.
For more detailed instructions and diagrams, please refer to the HORIZON HOBBY DLE35RA Gas Rear Exhaust with Electronic Ignition Instruction Manual provided with the product.
Add New Comment