User Manual Q&AAnswer
Feb 18, 2025 - 10:55 PM
To connect the WOPET S60 2.0 Ch Soundbar Speaker System to your TV, follow these steps:
1. Check the available audio output ports on your TV. The most common ports are HDMI ARC, optical audio, and RCA.
2. If your TV has an HDMI ARC port, use an HDMI cable to connect the HDMI ARC port on the soundbar to the HDMI ARC port on your TV. This will allow for both audio playback and control of the soundbar using your TV remote.
3. If your TV has an optical audio port, use an optical audio cable to connect the optical audio port on the soundbar to the optical audio port on your TV. Make sure to remove the protective caps from both ends of the cable before connecting.
4. If your TV has RCA audio output ports, use an RCA cable to connect the RCA audio output ports on the TV to the corresponding RCA input ports on the soundbar. The RCA cable usually has red and white connectors for the right and left audio channels.
5. Once the physical connection is established, power on both the TV and the soundbar.
6. On your TV, navigate to the audio settings menu. Select the appropriate audio output option that corresponds to the connection you made (HDMI ARC, optical audio, or RCA).
7. Adjust the volume on the soundbar using its dedicated remote control or the buttons on the soundbar itself.
Please refer to the WOPET S60 2.0 Ch Soundbar Speaker System User Manual for more detailed instructions and troubleshooting tips.
Add New Comment