User Manual Q&AAnswers
Feb 18, 2025 - 10:53 PM
To insert the micro-SIM card into the COMET U0141TM Datalogger with GSM Modem, follow these steps:
1. Locate the micro-SIM card slot on the device. It is usually located on the side or back of the datalogger.
2. Use a SIM card ejector tool or a small paperclip to gently push the SIM card tray release button. This will eject the SIM card tray.
3. Place the micro-SIM card into the SIM card tray. Make sure the gold contacts on the SIM card are facing down and align with the contacts on the tray.
4. Carefully insert the SIM card tray back into the datalogger until it clicks into place.
5. If your SIM card is protected by a PIN code, you will need to enter the PIN code during the device configuration process. Make sure to note down the PIN code and enter it when prompted.
Please refer to the COMET U0141TM Datalogger with GSM Modem User Manual for more detailed instructions and illustrations.
Feb 18, 2025 - 10:54 PM
To insert the micro-SIM card into the COMET U0141TM Datalogger with GSM Modem, follow these steps:
1. Locate the micro-SIM card slot on the device. It is usually located on the side or back of the datalogger.
2. Use a SIM card ejector tool or a small paperclip to gently push the SIM card tray release button. This will eject the SIM card tray.
3. Place the micro-SIM card into the SIM card tray. Make sure the gold contacts on the SIM card are facing down and align with the contacts on the tray.
4. Carefully insert the SIM card tray back into the datalogger until it clicks into place.
5. If your SIM card is protected by a PIN code, you will need to enter the PIN code during the device configuration process. Make sure to note down the PIN code and enter it when prompted.
Please refer to the COMET U0141TM Datalogger with GSM Modem User Manual for more detailed instructions and illustrations.
Add New Comment