User Manual Q&AAnswer
Feb 18, 2025 - 10:52 PM
To set up the W60P base and W56H handset, follow these steps:
1. Insert the battery: Open the battery cover on the back of the handset, insert the battery, and press it down. Close the battery cover.
2. Set up the Charger Cradle: Connect the USB plug on the charger cradle to the DC5V port on the power adapter. Connect the power adapter to an electrical outlet.
3. Charge the handset: After setting up the handset and charger, place the handset in the charger. The handset battery takes about 3 hours to fully charge. The charging status will be displayed on the top right-hand corner of the LCD screen.
4. Attach the Belt Clip: Push the clip onto the back of the handset and insert the clip into the designated notches in the handset.
Add New Comment