User Manual Q&AAnswer
Feb 18, 2025 - 10:47 PM
To install the Optoma DS-3120PMG+ 120 Inch Diagonal 4:3 manual pull down screen, please follow the instructions below:
1. Determine the mounting location: Choose a suitable location on the wall or ceiling where you want to install the screen. Ensure that the surface is flat and capable of supporting the weight of the screen.
2. Mark the mounting holes: Hold the screen casing against the wall or ceiling and mark the positions of the mounting holes using a pencil or marker.
3. Drill pilot holes: Using an appropriate drill bit, drill pilot holes at the marked positions. Make sure the holes are deep enough to securely hold the mounting screws.
4. Attach the screen casing: Align the mounting holes on the screen casing with the pilot holes on the wall or ceiling. Insert the appropriate screws through the holes and tighten them securely using a screwdriver or drill.
5. Adjust the screen position: Once the screen casing is securely mounted, you can adjust the screen position by pulling it down or pushing it up. The screen can be stopped at any desired height.
6. Retract the screen: To retract the screen, gently pull it down to release the locking mechanism, and then allow it to slowly retract back into the casing. The screen has a slow retraction mechanism to prevent it from snapping back too quickly.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment