User Manual Q&AAnswer
Feb 18, 2025 - 10:26 PM
To connect the WiFi 2.4G RJ45 A adapter to your solar controller, inverter, or inverter/charger, follow these steps:
1. Locate the RJ45 port on the WiFi 2.4G RJ45 A adapter.
2. Connect the RJ45 port of the adapter to the corresponding port on your solar controller, inverter, or inverter/charger.
3. Once connected, the Link indicator on the adapter will indicate the communication status. If it is solid green, it means the adapter is connected to the WiFi network. If it is off, it means the adapter is not connected to the WiFi network. If it is fast flashing green, it means the adapter has been reset to factory settings.
4. The Power indicator on the adapter will indicate the power status. If it is solid green, it means the adapter is powered on. If it is off, it means the adapter is not powered on.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment