How do I assemble the TOPMAQ LD-P02201 20 Ton Hydraulic Press? (TOPMAQ LD-P02201 20 Ton Hydraulic Press User Manual)

Answer

manuals.plus

Feb 18, 2025 - 10:14 PM


The assembly of the TOPMAQ LD-P02201 20 Ton Hydraulic Press involves the following steps:

1. Start by attaching the upper crossbeam (Item 1) to the press platform (Item 13) using the provided bolts (Item 2), flat washers (Item 3), and nuts (Item 4). Make sure to tighten them securely.

2. Attach the bottle jack (Item 6) to the jack base (Item 7) using the provided bolts, flat washers, and nuts (Items 2, 3, and 4). Again, tighten them securely.

3. Attach the hook (Item 8) to the upper crossbeam using the provided bolt (Item 2), flat washer (Item 3), and nut (Item 4). Repeat this step for the other hook.

4. Attach the posts (Item 9) to the press platform using the provided bolts (Item 17), flat washers (Item 18), and nuts (Item 19). Make sure to tighten them securely.

5. Attach the press plates (Item 12) to the rods (Item 14) using the provided bolts (Item 20). Tighten them securely.

6. Attach the spreader (Item 15) to the press platform using the provided bolts (Item 17), flat washers (Item 18), and nuts (Item 19). Tighten them securely.

7. Attach the angle steel legs (Item 16) to the press platform using the provided bolts (Item 17), flat washers (Item 18), and nuts (Item 19). Tighten them securely.

Please refer to the user manual for detailed diagrams and instructions on the assembly process. Ensure that you follow all safety precautions mentioned in the manual while assembling and using the hydraulic press.