User Manual Q&AAnswer
Feb 18, 2025 - 10:02 PM
To update the firmware on your BLAZE PowerZone Connect Series Amplifier, please follow these steps:
1. Download the Firmware Update File: Visit blaze-audio.com/support and download the latest firmware update file for your amplifier.
2. Connect to the Amplifier via Wi-Fi:
- Ensure that your PowerZone Connect amplifier is connected to a mains power supply and wait for the front panel Wi-Fi indicator to turn green.
- On your mobile, laptop, or desktop device, search for available Wi-Fi networks and connect to "Blaze XXXXXXXXXXXXXXXX" (replace XXXXXXXXXXXXXXXX with the serial number of your amplifier) using the password "password." The amplifier's serial number can be found on its rear panel.
- Open a web browser on your device and enter the IP address: 192.168.4.1. This will open the PowerZone Control web app interface, which is your gateway for updating the amplifier's firmware.
3. Update the Firmware 1.3:
- You are now connected to the PowerZone Control web app. Go to Settings > Device and below Firmware update, press "UPDATE."
- Select the downloaded firmware update file.
- Wait for the installation to complete. The amplifier will automatically restart itself in approximately 2 minutes.
- Reconnect to the amplifier's Wi-Fi network.
- Confirm the successful update by refreshing the browser and checking the Firmware Version under Settings > Device.
4. Load a Speaker Preset from the Speaker Library:
- Download your desired Speaker Preset from blaze-audio.com/support.
- Connect to the amplifier and open the PowerZone Control web app.
- Go to Output > Speaker Presets and press "Import Speaker Preset."
- Select the .zcp Speaker Preset file that you just downloaded.
- Your Speaker Preset is now loaded and ready to use.
By following these steps, you will be able to update the firmware on your BLAZE PowerZone Connect Series Amplifier and load a Speaker Preset from the Speaker Library.
Add New Comment