User Manual Q&AAnswer
Feb 18, 2025 - 09:59 PM
To set the daily and weekly programming on the SENNA 300 thermostat, follow these steps:
1. Press and hold the "Weekly Program" button for 3 seconds while the thermostat is on.
2. The hour part of the setting will start blinking. Use the "+" and "-" buttons to set the desired hour.
3. After setting the hour, press the "Heating & Cooling Option" button once to set the minute. The minute part will start blinking. Use the "+" and "-" buttons to set the desired minute.
4. Press the "Heating & Cooling Option" button once more to set the day of the week. The day indicator will start blinking. The first day of the week is set as Monday, indicated by the number "1". Use the "+" button to switch to the next day and the "-" button to switch to the previous day.
5. Once the desired day is selected, press the "Weekly Program" button once to set a schedule.
6. The "P0" setting will start blinking. Press the "Weekly Program" button once more to set the temperature value for "P0". Note that the hour setting for "P0" cannot be changed as it is a factory setting.
7. Press the "Weekly Program" button again. The day indicator will start blinking. If you don't want to change the day, press the "Weekly Program" button again to switch to the "P1" setting by using the "+" button.
8. Set the hour, minute, and temperature values for each schedule setting following the same steps as above.
9. Once all changes are made, press and hold the "Weekly Program" button for 3 seconds to save the settings.
You can check the weekly schedule by pressing the "Weekly Program" button once while the thermostat is on. Use the "+" and "-" buttons to navigate through the days, and press the "Mode" button to see the settings between "P0-P6".
Please note that these instructions are based on the information provided in the user manual for the SENNA 300 thermostat. For further assistance or more detailed instructions, refer to the user manual or contact the manufacturer's customer support.
Add New Comment