User Manual Q&AAnswer
Feb 18, 2025 - 09:55 PM
To pair the Room Thermostat with the Receiver, please follow these steps:
1. Make sure your heating/cooling unit and its power source are shut down.
2. Press and hold the sync button on the Receiver for 2 seconds. The receiver's LED light should start blinking green.
3. While your Room Thermostat is turned off, press and hold the "On/Off" button for 3 seconds.
4. Press the button until the " " menu appears on the Room Thermostat's display.
5. Use the "+" or "-" buttons on the Room Thermostat to adjust the temperature while the LED on the Receiver is flashing green.
6. If the pairing is successful, the green LED on the Receiver will stop flashing and remain constant.
7. Congratulations! The Receiver and Room Thermostat are now paired to each other.
Please refer to the "PAIRING THE ROOM THERMOSTAT AND THE RECEIVER" section in the user manual for more information and visual references.
Add New Comment