User Manual Q&AAnswer
Feb 18, 2025 - 09:54 PM
To calibrate the temperature on the General Life Mitra 230S Digital Room Thermostat, follow these steps:
1. Make sure the device is turned off.
2. Press and hold the button for 3 seconds.
3. Press the button until the "°C" menu appears.
4. Use the button to set the desired temperature difference. This value can be adjusted between "-8°C" and "+8°C".
5. To save the settings and exit, press the "On/Off" button until the device turns off.
Note: The recommended temperature calibration is "0.0°C".
Add New Comment