User Manual Q&AAnswer
Feb 18, 2025 - 09:53 PM
To set the daily and weekly programming on the GENERAL LIFE HT330S Digital Room Thermostat, follow these steps:
1. Press and hold the "Weekly Program" button for 3 seconds while the thermostat is on.
2. The hour part of the setting will start blinking. Use the "Up" and "Down" buttons to set the desired hour.
3. After setting the hour, press the "Heating & Cooling Option" button once. The minute part will start blinking. Use the "Up" and "Down" buttons to set the desired minute.
4. After setting the minute, press the "Heating & Cooling Option" button once to set the day of the week.
5. The days of the week will start blinking on the screen. You can set the same schedule for every day, weekdays only, or weekends only. Use the "Up" button to select the desired option.
6. Once you have selected the desired option, press the "Weekly Program" button once to set a schedule.
7. The "P0" setting will start blinking on the screen. Set the temperature value for "P0" by pressing the "Weekly Program" button once more. Note that the hour setting for "P0" cannot be changed as it is a factory setting.
8. Press the "Weekly Program" button again. The day indicator will start blinking. If you do not want to change the day, press the "Weekly Program" button again to switch to the "P1" setting by pressing the "Up" button.
9. Set the hour and minute for "P1" using the same process as in step 2.
10. Press the "Weekly Program" button to set the temperature value for "P1".
11. Repeat steps 8-10 to set schedules for other days of the week (up to "P6").
12. Once you have made all the desired changes, press and hold the "Weekly Program" button for 3 seconds to save the settings.
By following these steps, you can program the GENERAL LIFE HT330S Digital Room Thermostat to automatically adjust the temperature based on your desired schedule for different days of the week.
Add New Comment