How do I program the weekly schedule on the ARUNA 302S Wired Room Thermostat? (GENERAL LIFE ARUNA 302S Room Thermostat User Manual)

Answer

manuals.plus

Feb 18, 2025 - 09:46 PM

To program the weekly schedule on the ARUNA 302S Wired Room Thermostat, follow these steps:

1. Make sure the thermostat is turned on.
2. Press and hold the "Weekly Program" button for 3 seconds.
3. The hour part of the screen will start blinking. Use the "Up" and "Down" buttons to set the desired hour.
4. Press the "Heating & Cooling Option" button once to set the minute. The minute part of the screen will start blinking. Use the "Up" and "Down" buttons to set the desired minute.
5. Press the "Heating & Cooling Option" button once again to set the day of the week. The day indicator will start blinking. The first day of the week is Monday, indicated by the number "1". Use the "Up" and "Down" buttons to select the desired day.
6. Once the day is set, press the "Weekly Program" button once to set a schedule.
7. The "P0" setting will start blinking on the screen. Press the "Weekly Program" button once more to set the temperature value for "P0". Note that the hour setting for "P0" cannot be changed as it is a factory setting.
8. Press the "Weekly Program" button again. The day indicator will start blinking. If you don't want to change the day, press the "Weekly Program" button again to switch to the "P1" setting by pressing the "Up" button.
9. Set the hour, minute, and temperature value for each schedule setting following the same steps.
10. Once all changes are made, press and hold the "Weekly Program" button for 3 seconds to save the settings.

Note: You can check the weekly schedule by pressing the "Weekly Program" button once while the thermostat is on. Use the "Up" and "Down" buttons to navigate through the days and the "Mode" button to see the settings between "P0-P6".