Answer

Feb 18, 2025 - 09:38 PM
To calibrate the temperature on the MITRA 250S Digital Room Thermostat, follow these steps:
1. Ensure that the device is turned off.
2. Press and hold the button for 3 seconds.
3. Press the button until the " " menu appears.
4. Use the button to set the desired temperature difference. This value can be adjusted between "-8oC" and "+8oC".
5. To save the settings and exit, press the "On/Off" button until the device turns off.
Note: The recommended temperature calibration is "0.0oC".
For more information and detailed instructions, please refer to the "ROOM THERMOSTAT TEMPERATURE CALIBRATION" section in the user manual.
Add New Comment