User Manual Q&AAnswer
Feb 18, 2025 - 09:27 PM
To install the INNOCN 44C1G 43.8 Inch Ultrawide Computer Art Monitor, please follow these steps:
1. Open the carton package and take out the monitor. Place it on a flat surface.
2. Take out the fixing base EPE.
3. Remove the upper styrofoam and take out the monitor from the fuselage bag. Put the monitor back into the original lower styrofoam cover.
4. Take out the bracket and the base. Fasten them with the hand xxxx that comes with the base.
5. Insert the hook at the front end of the shaft of the lifting bracket into the bayonet of the rear shell obliquely. Gently press the tail end perpendicular to the surface of the rear shell, so that the lock of the lifting bracket can be buckled on the quick release button of the rear shell. The quick release button should snap into place.
6. Simply hold the stand with your hand to stand the monitor upright.
Note: During the installation, do not take out the monitor from the foams, and do not pinch the liquid crystal screen with your hand to avoid damage.
For more detailed instructions and illustrations, please refer to the "Installation" section in the user manual provided with the monitor.
Add New Comment