User Manual Q&AAnswer
Feb 18, 2025 - 09:26 PM
To install the base of the INNOCN 29C1F-D 29 Inch Ultrawide Screen Art Monitor, please follow these steps:
1. Open the carton package and remove the upper and lower foam covers. Place them flat on a table top.
2. Take off the top cover of Polylong and remove the body bag. Put the body back into the original bottom cover of Baolong.
3. Take out the bracket and base. Assemble the base by tightening the manual screws on it.
4. Insert the hook at the front end of the shaft of the lifting bracket into the bayonet of the rear shell obliquely. Gently press the tail end perpendicular to the surface of the rear shell so that the lock of the lifting bracket can be buckled on the quick release button of the rear shell. The quick release button should snap into place.
5. Simply hold the stand with your hand and stand the monitor upright.
Note: During the standing of the monitor, do not take it out from the foams, and do not pinch the liquid crystal screen with your hand to avoid damage.
For more detailed instructions and illustrations, please refer to the "Installation" section of the user manual provided with the monitor.
Add New Comment