User Manual Q&AAnswer
Feb 18, 2025 - 09:05 PM
To connect the kvm-tec V102022 smart Easy Full HD KVM Extender Over IP, follow these steps:
1. Connect the CON/Remote Unit and the CPU/Local Unit to the included 12V 1A power supply.
2. Connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect your keyboard and mouse to the CON/Remote Unit.
3. Connect the CPU/Local Unit and the CON/Remote Unit with a network cable.
4. Connect the DVI cable to the DVI socket of your PC and the other end to the DVI socket of the CPU/Local Unit (PC-in). Then connect your monitor to the CON/Remote Unit using a DVI cable.
5. If you are using a switch, connect all endpoints to the switch. Make sure that all connections have a bandwidth of 1Gbit/sec. For video sharing, the network must support IGMP snooping (Layer3).
Please refer to the manual for more detailed instructions and troubleshooting tips.
Add New Comment