User Manual Q&AAnswer
Feb 18, 2025 - 09:00 PM
To set the power share mode on the SmartGen HLS300A Power Share Module, follow these steps:
1. Connect the module to the genset and ensure that the module is powered on.
2. Press the UP button on the module for 3 seconds in the information display interface.
3. The module will enter the test mode. Press the UP button again to exit the test mode.
4. In the information display interface, navigate to the power share mode setting.
5. Use the touch-button operations on the LCD display to select the power share mode.
6. Once the power share mode is selected, the module will automatically share active power and reactive power proportionally and evenly to each operating genset based on genset capacitance.
Please refer to the SmartGen HLS300A Power Share Module User Manual for more detailed instructions and information on setting up and using the module.
Add New Comment