User Manual Q&AAnswer
Feb 18, 2025 - 08:53 PM
To charge the Elinchrom FIVE Battery , you can use either the Elinchrom FIVE unit (20960.1) or directly from the USB-C input with the Elinchrom Charger (11052). Here are the steps to charge the battery:
1. Connect the battery to the charger or the FIVE unit.
2. During charging, the LED indicator on the battery will blink green.
3. The "state of charge" LEDs on the battery will indicate the battery's charging progress.
4. Once the battery is fully charged, the LED indicator and the "state of charge" LEDs will remain switched on.
5. When the charger is disconnected, the LED indicator will go out immediately, and the "state of charge" LEDs will turn off after 3 seconds.
6. The FIVE Battery charges to 80% in approximately 70 minutes.
Please note that the charge duration may vary depending on the battery's state of charge, and it will be longer if the battery has been completely discharged for a long time. It is also important to use the original Elinchrom Charger and to follow the temperature precautions mentioned in the manual.
For more detailed information, please refer to the Elinchrom FIVE Battery Monolight Flash Unit User Manual.
Add New Comment