User Manual Q&AAnswer
Feb 18, 2025 - 08:42 PM
To change the spectrum's frequency range in Voxengo SPAN 3.15, you can adjust the "Freq Lo" and "Freq Hi" parameters. These parameters determine the lower and upper frequency limits of the displayed spectrum.
In version 3.15, the maximum value for "Freq Lo" has been changed to 500 Hz (previously 1000 Hz), and the minimum value for "Freq Hi" has been changed to 600 Hz (previously 2000 Hz). This update allows for finer low- and mid-frequency range selections.
To change the frequency range, follow these steps:
1. Open Voxengo SPAN in your preferred digital audio workstation (DAW) as a plugin.
2. Locate the "Freq Lo" and "Freq Hi" parameters in the plugin's user interface.
3. Adjust the values of these parameters to set the desired frequency range. You can enter the values manually or use the provided controls (e.g., sliders or numerical input fields) to adjust them.
4. As you modify the values, the spectrum display will update accordingly to reflect the new frequency range.
By customizing the "Freq Lo" and "Freq Hi" parameters, you can focus the spectrum analysis on specific frequency bands of interest in your audio material.
Add New Comment