User Manual Q&AAnswer
Feb 18, 2025 - 08:41 PM
To install the Greentech Taifun Mini Professional Nail Dust Collector under a work table, please follow these steps:
1. Carefully unpack the dust extractor and check if the black rubber seals on the edges are properly stuck.
2. Place the dust extractor on the underside of the table and adjust it so that the cut-out for the ventilation grille is as central as possible.
3. Use a jigsaw or similar tool to make a cut-out in the middle of the table with a diameter of 160 mm.
4. Fasten the nail dust collector to the table using suitable screws (not included in the delivery). Make sure to use screws of the appropriate length.
If you have any further questions or need more detailed instructions, please refer to the operating manual provided with the Greentech Taifun Mini Professional Nail Dust Collector.
Add New Comment