How do I install the Lucci decor 011834 Valona 1 Light Pendant In Concrete with Clear Glass? (Lucci decor 011834 Valona 1 Light Pendant Owner's Manual)

Answer

manuals.plus

Feb 18, 2025 - 08:39 PM

Thank you for your purchase of the Lucci decor 011834 Valona 1 Light Pendant In Concrete with Clear Glass. To ensure a safe and proper installation, please follow the steps outlined below:

1. Before starting the installation, make sure the power to the circuit is turned off at the main electrical panel.

2. Carefully unpack the pendant light and ensure all the necessary parts are included.

3. Determine the desired location for the pendant light. It is recommended to have a qualified electrician install the light if you are unsure about electrical work.

4. Install the mounting bracket onto the electrical box in the ceiling using the provided screws. Make sure the bracket is securely fastened.

5. Connect the electrical wires from the pendant light to the corresponding wires in the ceiling. Follow the color-coded instructions in the manual for proper wiring.

6. Once the wires are securely connected, carefully tuck them into the electrical box and attach the pendant light to the mounting bracket using the provided screws.

7. Adjust the height of the pendant light by adjusting the suspension length. The suspension length can be adjusted by loosening the locking nut on the suspension cord and sliding it up or down. Once the desired height is achieved, tighten the locking nut to secure it in place.

8. Install the recommended globe (not included) by following the instructions provided with the globe. Make sure to use a globe that is compatible with the pendant light's maximum wattage and type (ES).

9. Finally, turn on the power at the main electrical panel and test the pendant light to ensure it is functioning properly.

If you have any further questions or need additional assistance, please refer to the installation instructions provided with the pendant light or contact Lucci Décor customer support at support@beaconlighting.com.au or call 03 8561 1599.

Note: It is always recommended to consult a qualified electrician for any electrical installations to ensure safety and compliance with local regulations.