User Manual Q&AAnswer
Feb 18, 2025 - 08:37 PM
To connect your Jabra Evolve 75 headset to your computer via Bluetooth, please follow these steps:
1. Turn on your Jabra Evolve 75 headset by pressing and holding the power button until the LED light turns on.
2. On your computer, make sure Bluetooth is enabled. You can usually find the Bluetooth settings in the system tray or in the Control Panel.
3. Put your Jabra Evolve 75 headset in pairing mode by pressing and holding the Bluetooth button on the headset until the LED light starts flashing blue.
4. On your computer, go to the Bluetooth settings and click on "Add a device" or "Pair a new device".
5. Your computer should now start searching for nearby Bluetooth devices. Wait for your Jabra Evolve 75 headset to appear in the list of available devices.
6. Select your Jabra Evolve 75 headset from the list and click on "Connect" or "Pair".
7. If prompted, enter the PIN code "0000" to complete the pairing process.
8. Once the pairing is successful, your Jabra Evolve 75 headset should be connected to your computer via Bluetooth.
If you are still experiencing difficulties connecting your Jabra Evolve 75 headset to your computer, please refer to the user manual for further troubleshooting steps or contact Jabra customer support for assistance.
Add New Comment